国产凹凸在线一区二区色老头,78精品国产综合久久香蕉,色花花欧美综合首页,亚洲AV 无码 高潮 蜜臀

ABOUT THE SHOW

株式會社　富士精工

Exhibitor name
株式會社　富士精工
FujiSeiko Co., Ltd.
Booth NO. 1-402
Address

〒379-2301

群馬県

太田市藪塚町2991-1

2991-1, Yabuzuka-cho, Ota-shi, Gunma, 379-2301
Website http://www.fuji-gr.co.jp/
Email
Phone number +81-277-78-5566
PR message We can offer the One Stop Service for plastic injection mold manufacturing including mold design, machining, finishing, assembly and molding trial. We also offer die-cast and thixomold molds too.
We will introduce the Heat & Cool molding technology and the appearance measures of GF-containing resin.
The Main Item

Molding samples by Heat & Cool technology.
The name of Item[1] Control panel with Piano Black molding
Details[1]

We can apply an ultra-mirror finish to the cavity surface of the mold, a specular gloss is achieved on the surface of the molded product.
Conventional molding product: Specular gloss cannot be obtained because the ultra-specular state cannot be completely transferred to the molded product.
Molding with Heat & Cool technology: The mirror surface can be faithfully reproduced on the molded product.
A glossy ultra-specular gloss is achieved, weld lines are not visible.
Also the flow marks and other molding defects can be eliminated.
The name of Item[2] Direct decoration milling: Faithfully directly milling the design according to the 3D model by MC.
Details[2]

A machining center faithfully processes the decorative design according to the 3D model directly on the cavity surface of the mold.
Conventional molding: The texture cannot be faithfully reproduced on the molded product.
Molding with H&C technology: The texture can be faithfully reproduced on the molded product, and 100% of the same decoration processing can be repeated for any number of molds.
The name of Item[3] Direct decoration milling: Faithfully directly milling the hair line according to the data by MC.
Details[3]

Hairline decoration is achieved on the surface of the molding product by applying hairline directly to the cavity surface of the mold using a Machining Center.
Conventional molding : Fine hair lines cannot be completely transferred to the molding product, and texture cannot be obtained.
Molding with H&C technology: A high-quality hairline with a matte feel can be faithfully reproduced on the molding product.
The name of Item[4] Molding with resin containing GF: Improve the glass exposure on the surface of the molded product.
Details[4]

This is a rear grip for motorcycles, and was realized with a molding product made of GF-containing resin as an alternative to metal product.
In common sense, GF is exposed on the surface of the molding product, and it cannot be used as a part that people touch.
General molding: The glass floats on the molding product, so it cannot be used for parts that people touch.
Molding with H&C technology: The glass floating on the surface of the molding product has been greatly improved, and it can be used without any effect even if a person grips it.
The name of Item[5] Molded product with clear resin containing clear glass filler.
Details[5]

This is a molding product from a test mold for Heat&Cool molding.
In order to realize a transparent molding product by combining clear GF with clear resin, the material developed by the material manufacturer is realized as a transparent molding product as intended by the material manufacturer using Heat&Cool molding technology.
We have been confirmed that a transparent molded product can be molded.
Result with this molding product, we believe that new applications for this material will be opened.
The name of Item[6] Heat & Cool technology with Draft-free molding technology.
Details[6]

Molded products can be released without a draft angle on the cavity side of the mold. It is one of the Heat & Cool technologies and it is not require a slide by incorporating a special structure inside the mold. Of course, since no slide is used, there are no lines on the side of the molded product. In addition, it is also possible to set grain, leather texture and mirror finish on the product.
The name of Item[7] 3-color molding: The unique structure of the 3-color mold has realized automatic gate cut process.
Details[7]

In conventional molding, a molded product is made by combining two-color molding, painting and laser processing technology.
In addition, acrylic lenses molded in other processes were assembled with two-color molded products.
Therefore, we propose new manufacturing technology.
With our technology, we are now able to obtain molded products that incorporate acrylic lenses using a dedicated three-color mold and molding machine.
The name of Item[8] Heat & Cool with Metallic molding without black line
Details[8]

We have realized no black line molding with metallic resin for molded products with multiple openings, which has been considered impossible.
We have developed heat and cool molding technology in an ultra-high temperature range and special molds.
And we realized a unique control in the mold to eliminate the orientation of metallic resin molding.
The name of Item[9] Heat & Cool with In Mold press molding
Details[9]

This technology is one of the combined technologies with H&C, and can physically press the molded product inside the mold after the resin is injected.
This molded product is similar to the result of the injection press method on a dedicated molding machine.
However, this technology does not require a special molding machine and can be molded with a general molding machine.
Molding with H&C only: Surface distortion occurs in thick 5mm and uneven 3mm area.
H&C+ Mold Press: Improves surface distortion.
Category of
Exhibit Items

A. MOLDS, MOLD MATERIALS

Molds

Formed Products

N. PARTS PROCESSING TECHNOLOGY

Precision Processing

About measures against COVID-19

We kindly ask for your cooperation and understanding regarding the admission restrictions, by avoiding crowding and congestion at the reception, avoiding contact by giving and receiving name tags, grasping the contact information of visitors, grasping the number of visitors in the venue, etc.
When visiting the venue, please cooperate with cough etiquette to prevent the spread of infection.
Thank you for your cooperation when you visit the exhibition.